Back to Small Stoves
Di Lusso R5 Cube
SITTING IN A FIREPLACE, FREESTANDING OR ON A BENCH, THE R5 CUBE MODELS FIT EFFORTLESSLY INTO ANY ROOM. As with all Di Lusso fires the R5 Cube is a convector, it forms hot streams of air which flow into your home.
|Heat Output Range (kW)||3 – 13|
|CO Emissions (at 13% O2) (%)||0.2|
|Air Brick Required||No|
|Stove Technology||Cleanburn Technology|
|Hot Airwash (to keep the glass clean)||Yes|
Esse 100 Double Door SE
Like its single-door sibling, this is a classic ESSE wood-burner – providing a heart-warming rustic focal-point for your living space, combined with 21st century energy-efficiency and all-round performance. To enjoy the flames to the full, there’s no need to burn with the doors open – thanks to ESSE’s advanced Afterburn™ airwash technology, which gives you exceptional burn rate control, while keeping the glass door clear at all times. For even greater use of enjoyment, the 100 DD is compatible with our advanced automatic electric ignition technology; so no need for matches, lighter or kindling. It can be installed with a top or rear flue, and is also available with a 300mm tall log store. Specifications Efficiency 82% 11 DD SE Smoke control area approved Flue Pipe Diameter 5" (125mm) Approved For Use On Decorative Hearths? Yes Additional Room Vent Required? Yes Output Logs 5kW Anthracite 4.8kW Clearances to Combustibles Sides 600mm Top 450mm Front 305mm Rear 600mm
Cleanburn Nordstrand 5 Porcelain
The Controls allow the heat to be perfectly maintained to the temperature you want using our Tripleburn technology. This stove flawlessly matches a contemporary style with technology whilst not compromising on the ecological impact. Heat Output Range (kW) 4 - 8 Nominal Output (kW) 4.9 Defra Approved Yes Efficiency (%) 83 CO Emissions (at 13% O2) (%) 0.37 Air Brick Required No Can be installed on a 12mm hearth Yes Stove Technology Tripleburn Technology Hot Airwash (to keep the glass clean) Yes
Mendip Woodland Logstore SE
The Woodland stove was designed with The Woodland Trust in mind and so focuses on burning wood efficiently and cleanly. Its easy to use, multipurpose, three way air control adjustment system means that everyone is capable of achieving optimum combustion. The tertiary air also aids post combustion of the flue gases; so ultimately, your stove will burn cleanly, creating as much energy from your fuel as possible. The woodland stove has a good size fire box for standard cut logs, the latest technology in combustion for wood, a pre heated air wash system that will keep the glass clean, for your visual. Built with a high quality steel body and cast door the woodland stove has a nominal output of 4.5kw which will serve most internal spaces well. The radiating heat along with low distance to combustibles will help the stove fit nicely into your space with the best results.
This model features a heat exchange convection chamber, with the firebox sitting inside a second outer casing with a cavity between the two. Cool air from the room is drawn in at the base of the stove and heated before rising out of the top of the stove into the room, keeping the mantle cooler. Unlike ordinary stoves, which only emit heat in straight lines, ESSE convector stoves emit both radiation and a continuous gentle stream of hot air, evenly heating every corner of the room. With a slightly lower heat output of 4kW, the 301 can fit straight into a standard fireplace. But the larger firebox of the 350, which delivers 5kW, means the back firebrick needs to be removed. Advanced features shared by both models include precision air intake control; secondary air control, allowing you to burn either wood or smokeless fuel; and ESSE’s Afterburn™ airwash technology, which gives you exceptional burn rate control, while keeping the glass door clear at all times. Available with a traditional style door or in a contemporary matte black finish with stainless steel handle. Whichever you choose, your ESSE inset stove should be installed in masonry fireplaces; i.e. brick, tile or stone. Marble hearths also generally present no problem, though marble varies and may not always be able to withstand high temperatures.
- Clearances to combustibles: 150mm sides, 400mm top & 250mm front.
|Construction||Steel / Cast Iron|
|Flue Outlet||Class 1 Chimney|
|Flue Pipe Diameter||6" (150mm)|
|Suitable for Continuous Burning?||Yes|
|Pre-heated Sedcondary Airwash?||Yes|
|Operating range (depending on fuel type & settings)||Up to 5KW|
|Additional Room Vent Required||No|
|Efficiency Test Data|
|Energy Rated - 301SE||A+|
|Energy Rated - 350SE||A|
|Output KW EN13240(ST)||4.1|
|CO Emissions Corrected to 13% O²||0.14|
|Flue Temperature Mean °C||230|